Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit. A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls or fitted on a stalk next to the steering wheel. This harness also aids in the retention of the four factory reversing cameras, allowing for 360-degree camera functionality. The interface allows the aftermarket stereo to interpret and interact with the factory camera information as if it were the original system. The language of the vehicle must be set prior to installation.This product does not support the amplifier fade feature. Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls. Safety: Allows you to keep your hands on the steering wheel and eyes on the road. Retains steering wheel control functionality.
Retains factory reverse camera (if vehicle is equipped). Provides outputs for speed pulse, park brake and reverse gear. Choose the relevant head unit connection lead according to the make of aftermarket head unit you wish to fit. Please check the connections in the vehicle match the harness you are purchasing. CTSTY019.2 Steering Control Adaptor.
PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle. 2 Universal head unit connection lead is suitable for.Chinese / Xtrons / 3 wire unbranded units (3 wire connection). JVC (3.5mm or single wire).
Panasonic (single wire but NOT AV units). Other Chinese SWC learning head units. You can simply cut the loops / wires to select which brand you are fitting.This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX head units / Older Kenwood units with the DIN plug. SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED. IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable. This item is in the category "Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Terminals & Wiring\Steering Wheel Interfaces". The seller is "dynamicsounds00" and is located in this country: GB.